White-Label Drawings: How a Builder Puts Their Name on the Documentation

What "white-label" means here

A client hires a builder, not a documentation studio. When the bathroom drawing set that lands in their inbox carries someone else's name and logo, it reads as outsourced work, even when the builder chose and paid for it. White-labelling removes that: the drawing set carries the builder's own identity instead of the studio that drew it.

For Form & Fixture members, this is not a cosmetic toggle. It changes what actually appears on the floor plan, the elevations, the reflected ceiling plan and the FF&E schedule the client and trades will use for the whole build.

What changes on the documentation set

Three things carry the builder's identity instead of Form & Fixture's own:

• Logo. A member uploads their logo once, in the portal's branding settings. Form & Fixture lifts a flat background off the file automatically (the common case of a logo exported on a white card) and crops it to the mark itself, so it renders cleanly at the small size a drawing header needs.
• Company name. The name a member sets replaces "Form & Fixture" wherever the identity mark appears on the set.
• Accent colour. Form & Fixture reads a dominant colour straight out of the uploaded logo and uses it as the accent through the document. A member can also set an exact brand hex if the auto-picked colour is not quite right. Get neither right and the set falls back to Form & Fixture's own studio mark and colour, so a builder who has not branded yet still gets a professional, consistent set, just not their own.

None of this touches the drawing content itself. The floor plan, elevations, RCP and FF&E schedule are the same fixed-price deliverable either way. White-labelling changes whose name is on the cover, not what the tiler or plumber is working from.

Why it matters for the client relationship

A renovation or new build already has a lot of names attached to it: the builder, the trades, sometimes a designer or architect. Every additional name the client has to track is a small tax on trust. When the bathroom documentation shows up under the builder's own brand, it looks like part of the service the client already engaged, not a piece farmed out to a third party they have never heard of.

It also protects the builder's position with the client through the life of the job. If a question comes up about the elevation or the FF&E schedule six weeks into the build, the client goes back to the builder, because the builder's name is the one on the document. That keeps the builder as the single point of contact rather than routing the client sideways to a studio they were never introduced to.

QR-coded plans stay current

Membership also includes a QR code on the FF&E schedule for each bathroom. It encodes a permanent link to that bathroom's live schedule rather than a static snapshot, so a code printed and stuck to a site cupboard or handed to a supplier keeps resolving to the current version even if a selection changes after the drawings were issued. A trade scanning it on site sees the same fixture list the builder sees, not a version that went stale the day it was printed.

Who this applies to

White-label drawings, member rates and QR-coded plans are part of Form & Fixture's builder membership: $300 a month (minimum one month) or $3,240 a year, saving 10% against the monthly rate. Membership is for builders only; homeowners and renovators ordering PAYG (bathroom $1,300, powder room $795) get the same drawing set at Form & Fixture's own branding.

Member pricing also drops the per-job cost: $1,100 for a bathroom and $649 for a powder room, on top of the branding and QR-code benefits above.

If a builder is ordering more than the occasional bathroom, the documentation showing up under their own name, at a lower per-job rate, is generally the bigger of the two savings. See designer vs Form & Fixture for how the fixed-price package compares to a full design engagement, or head to membership for the sign-up details.